COMPANY PRODUCT

1. Simple Introduction 
The purpose of ZXQ-5 metallographic specimen mounting press machine is to obtain the required detection plane by means of inlaying samples of unsuitable shape or size in order to meet the subsequent sample preparation procedures, or to protect the edges or prevent surface defects caused by the preparation process. In modern metallographic laboratories, widely used semi-automatic or automatic grinding / polishing machines have requirements for sample sizes and specifications. In order to meet this requirement, the specimen must be inlaid, so the mounting machine has become one of the necessary equipment in metallographic laboratory.
This machine belongs to the automatic metallographic sample mounting machine. It has the function of cooling in and out of water. It is suitable for all materials (thermosetting and thermoplastic). After setting the inlay parameters such as heating temperature, heat preservation time, force and so on, put the sample and inlay material, cover the gland, press the working button, it can finish the mounting press work automatically, no need of the operator on duty beside the machine. According to different requirements of the sample, it can randomly select and replace the molds of four specifications, and it can also press two samples at the same time, the preparation capacity is doubled.

2. Main Specifications

Die specification	Φ25mm, Φ30mm, Φ40mm, Φ50mm
Power supply	220V 50Hz
Maximum power consumption	1600W
System pressure setting range	0~2MPa(Corresponding sample preparation pressure range: 0~72mpa)
Temperature setting range	0~300℃
Heat preservation time setting range	0-99s
Dimension	615*510*500mm
Net weight	110kg
Cooling method	Water cooling